SPHINX 104-360 AP
SPHINX 104-360 AP - Presence detector (PIR)
■ Presence detector (PIR)
■ 1 channel
■ Surface-mounted installation
■ Lighting control with adjustable
light threshold value and adjustable
switch-off delay
■ Teach-in of current brightness
value possible via remote control
■ Additional impulse function can
be selected for combination with
staircase timer (ELPA), building
automation or PLC
■ Master/slave function: Up to ten
detectors to expand detection area
■ Test function for checking detection
area
■ Zero-cross switching
■ Automatic lighting control based on
presence and brightness
■ Detection area can be limited using
three enclosed segments
■ Mixed light measurement suitable
for the control of fluorescent,
incandescent and halogen lamps
■ Instant start-up possible via factory
preset
■ Push-button or switch options for
manual switching
■ Screwless terminals for quick
Installation
Technical data
SPHINX 104-360 AP |
|
Operating voltage |
230 V AC |
Frequency |
50 – 60 Hz |
Stand-by consumption |
1 W |
Light measurement |
Mixed light measurement |
Number of channels |
1 |
Type of contact |
NO contact |
Installation type |
Ceiling installation, Suface mounted |
Setting range brightness |
10 – 2000 lx |
Switching capacity light |
16 A (at 230 V AC, cos φ = 1) |
Detection angle |
360° |
Recommended installation height |
2,5 – 3,5 m |
Light switch-off delay |
1 s-20 min |
Incandescent lamp load |
2000 W |
Fluorescent lamp load (conventional) not corrected |
900 VA |
Fluorescent lamp load (conventional) parallel-corrected |
400 VA |
Fluorescent lamp load (conventional) series-corrected |
900 VA |
Fluorescent lamp load (conventional) lead-lag circuit |
900 VA |
Fluorescent lamp load (electronic ballast) |
400 VA |
energy saving lamps |
4 x 7 W, 3 x 11 W, 3 x 15 W, 3 x 20 W, 3 x 23 W |
Lamps |
Incandescent/halogen lamps, fluorescent lamps, energy saving lamps, LEDs |
Ambient temperature |
-10 °C … +55 °C |
Protection class |
II |
Type of protection |
IP 41 |