PresenceLight 180 SR
 |  |
PresenceLight 180 SR
Description
Presence detector (PIR)
Detection area 180°
Wall installation
Mixed light measurement
Light switch output (relay, 230 V)
Automatic lighting control
Lighting control with light threshold value and self-learning switch-off delay
Pulse function for staircase time switch
Can be configured remotely
The switching behaviour of the presence detector is controlled by presence and light
The self-learning switch-off delay adjusts to occupants' behaviour
The pulse function is for controlling a staircase time switch
The presence detector has a mixed light measurement and is suitable for switching the following types of lamp: Fluorescent lamps (FL/PL), halogen and incandescent lamps as well as LEDs
Test operation mode checks the detection area and installation
The parameters can either be set using the potentiometer or via the optional service remote control QuickSet plus
Technical data
|
PresenceLight 180 |
|
|
Operating voltage |
230 V AC |
|
Frequency |
50 Hz |
|
Recommended installation height |
1,6 – 2,2 m |
|
Installation type |
Wall installation |
|
Power consumption |
0,9 W |
|
Light measurement |
Mixed light measurement |
|
Setting range brightness |
10 – 1500 lx |
|
Light switch-off delay |
Impuls (0,5 s), 10 s-20 min |
|
Type of contact light |
Relay 230 V |
|
Lamps |
Incandescent/halogen lamps, fluorescent lamps, energy saving lamps, LEDs |
|
Resistive load |
1400 W |
|
Incandescent/halogen lamp load |
1200 W |
|
Compact and flourescent lamps |
960 VA (cos f = 0,8), 580 VA (cos f = 0,5) |
|
Compact and flourescent lamps (Number of electronic ballasts) |
10 x (1 x 58 W), 5 x (2 x 58 W), 16 x (1 x 36 W), 8 x (2 x 36 W), 16 x (smaller than 36 W) |
|
Type of connection |
Screw terminals |
|
Max. cable cross section |
2 x 2,5 mm² |
|
Mounting plate |
70 x 70 mm |
|
Size of concealed housing |
Ø 55 mm (NIS, PMI) |
|
Ambient temperature |
-20 °C … +50 °C |
|
Type of protection |
IP 54 |
