ECO-IR 360A SR
 |  |
ECO-IR 360A SR
Description
- Presence detector (PIR)
- Square detection area
- Genuine daylight measurement
- Light switch output (relay, 230 V)
- Presence switch output (relay, potential-free)
- Automatic control of lighting and HVAC
- Lighting control with light threshold value and self-learning switch-off delay
- HVAC control with separate switch-off delay
- The presence detector has "Genuine daylight measurement" and is only suitable for switching fluorescent lamps (FL/PL)
- Presence switch contact for HVAC control: The switching behaviour of the potential-free contact is only controlled by presence
- The parameters are set via the potentiometer
- The switching behaviour of the presence detector is controlled by presence and light
- The self-learning switch-off delay adjusts to occupants' behaviour
- The square detection area allows accurate and simple planning
Technical data
|
ECO-IR 360A SR |
|
|
Operating voltage |
230 V AC |
|
Frequency |
50 Hz |
|
Recommended installation height |
2 – 3,5 m |
|
Installation type |
Ceiling installation |
|
Power consumption |
0,9 W |
|
Light measurement |
Genuine daylight measurement |
|
Setting range brightness |
50 – 1600 lx |
|
Light switch-off delay |
2 min-15 min |
|
Type of contact light |
Relay 230 V |
|
Lamps |
fluorescent lamps |
|
Compact and flourescent lamps |
max. 1400 VA |
|
Compact and flourescent lamps (Number of electronic ballasts) |
12 x (1 x 58 W), 6 x (2 x 58 W), 18 x (1 x 36 W), 9 x (2 x 36 W), 18 x (smaller than 36 W) |
|
Presence switch-off delay |
10-60 min |
|
Type of contact presence |
Relay potential-free |
|
Switching capacity presence |
100 W (24 V DC), 460 VA (230 V AC), µ |
|
Switching output |
Potential-free |
|
Type of connection |
Spring terminals |
|
Max. cable cross section |
1,5 mm² |
|
Mounting plate |
70 x 70 mm |
|
Size of concealed housing |
Ø 55 mm (NIS, PMI) |
|
Ambient temperature |
+0 °C … +50 °C |
|
Protection class |
II as per EN 60 730-1 |
|
Type of protection |
IP 40 |
